To feed any IDS valve, choose
from our dispensing syringes, (to feed
thin to medium materials in very small shots) our
single cartridges, (for medium/thicker materials in smaller shots, beads).
For large volume
capacity, order one of our
reservoirs (for thin to medium materials) or one of our
pail dispenser units, for thicker
For a typical
Also in this Category:
1 LB Pressure Pot
1 Liter Pot
2 Liter Pot
1 Gallon Pot
2 Gallon Pot
5/10 Gallon Pot
You may also be
Also of interest;
Thin Wall tips
Doming & Potting
An "open top"
style (shown right,
click for larger image) is used if liners are required to prevent the material from making
contact with the sides of the container or if the fluid requires an
agitator (built into center of top lid).
The open style also lends itself to the
bulk dispensing of materials in pails, as long as they are thin enough to be
moved by air pressure (generally 40,000CPS or less) to the valve.
gallon open top tank can be fitted with a five gallon step-up for a pail,
for simple clean up.