|
| |
 |
1 Liter Pressure Pot Sealed
Pressure Pot (shown left, back right) is useful for a variety of
fluids, especially UV or Light sensitive materials.
For CA, or Cyanoacrylates,
choose the
One Pound Pressure Pot, (shown left,
front left)
with a convenient side slit that allows operator to monitor fluid levels
without opening the top. |
|
Also in this Category:
1 LB Pressure Pot
1 Liter Pot
2 Liter Pot
1 Gallon Pot
2 Gallon Pot
5/10 Gallon Pot
Other Valves
You may also be
interested in:
Dispensers
Valve Controller
Dispense Valves
Reservoirs
Robot
Platform
Also of interest;
Precision Needles
Needle Nozzles
Thin Wall tips
Dispensing
Help
Doming & Potting
Solder Dispensing
|
|
To feed any IDS valve, choose from our
dispensing syringes, (to feed thin
to medium materials in very small shots) our
single cartridges, (for medium to
thicker materials in smaller shots or beads) or for large volume
capacity, order one of our
reservoirs (for thin to medium
materials) or one of our
pail dispenser units, for thicker
materials. For a typical valve setup,
click here.
Simple to use:
-
Remove two threaded thumbscrews and lift lid.
-
Place uncapped material bottle in center of tank.
-
Return lid to top of pressure tank, assuring dip tube is
positioned inside the bottle of fluid.
-
Tighten thumbscrews.
-
Connect all material and air lines supplying pressure to the
tank.
1
Liter Pressure Pot Specifications:
Inside Dimensions:
5.25” diameter x 11.75” high
Overall Outside Dimensions:
8”
diameter x 14” high
Body of Tank:
Black, solid
anodized Aluminum
Gaskets:
(2)
PTFE encapsulated Viton® o-rings
Operating Air Pressure:
0-70 PSI
Air Inlet:
0.25” OD tube quick connect fitting
Material Outlet:
0.125” NPT polypropylene fitting
Part # Description
7011010 - 1
Liter UV Pressure Tank
7011011 - O-ring, PTFE Encapsulated Viton
for tank,2 required
|
|
| |
|
