|
| |
 |
A
BiPack System is used to
dispense
2-component adhesives from
50ML, 200ML and
400ML
cartridge guns.
A
system typically consists of a hand-held
pneumatic (shown left) or manual gun
(below)
a dual component cartridge
(comprised of a variety of different types of stoppers, plugs and
shims), and a motionless mixer (below). |
|
In this Category:
Cartridge Guns50 ML Guns
50ML Gun Parts
200 ML Guns
200ML Manual Parts
400 ML Guns
400ML Parts
You may also be
interested in:
Dispensers
Valve Controller
Dispense Valves
Reservoirs
Robot
Platform
Also of interest;
Precision Needles
Needle Nozzles
Thin Wall tips
Dispensing
Help
Doming & Potting
Solder Dispensing
Solder Mask |
|
The adhesive manufacturer will usually suggest the right mixer by specifying
the number of elements and length of the mixer you need. The mixer
type is determined by the size and ratio of the cartridge. (See table
below). These 200ML guns use dual cartridges,
which are usually prefilled by your adhesive manufacturer. If the
manufacturer does not provide your adhesives in cartridges, IDS
can pre-package any dual
component material in 50ML, 200ML or 400ML bi-pack
cartridges in 1:1, 2:1,4:1 and 10:1 cartridges, as
well as
Universal Cartridges, in some
cases.
If your adhesive supplier does not
offer packaging, or if you have already purchased material in bulk,
let IDS
Quote
you on your packaging needs.
In addition to cartridge guns, we carry
a complete line of mixers, but due to the complexity of correct packaging,
we are sorry, but we do not sell empty cartridges in bulk and we do not
recommend do-it-yourself packaging.
Special Offer: Limited Supply MIXPAC
Manual 200ML 1:1
Ratio Dual Gun
Name: MIXPAC® System 200 Manual Gun 200ML
1:1/2:1
Part #: DM200-01
Description: MIXPAC® 200ML hand held manual
gun. 200ML 1:1 / 2:1
Manual:
Click here.
List Price: $320.00
Each
Special Offer $195.00 |
|
5223004
-
200ML
Mix Ratios
1:1, 2:1, 4:1 and 10:1
-
Nominal Thrust 484 lbs.
-
Adjustable Regulator - 100 PSI
-
Dump Valve -
Side Loading
-
Air Hose Connector Included
|
|
5223006
-
200ML Ratio 1:1
Medium Duty
-
Medium duty for thick materials
-
In-Line Rods - No Bending
-
Sintered Steel
Catch Plate
-
Replaceable Parts
|
|
5223007
-
200ML
Manual Heavy Mix Ratios of 1:1, 2:1, 4:1 and 10:1
|
|
Plastic Spiral Bayonet Mixers for 200 and 400ML
Cartridge Guns
Motionless
(static) mixers for meter/mix dispensing and
hand-held, cartridge dispensing systems are used for a wide range of adhesive
and resin applications including aviation, electronics, general industrial,
medical and others. These advanced, hand-held dispensing
products are used with the latest adhesive technologies in dentistry,
surgical tissue and bone repair applications.
Part #
200ML Mixers
5222659 .25"ID x 24 ELEMENTS, 7.46"L, SLIP LUER TIP
5222660 .25"ID x 32 ELEMENTS, 9.49"L, SLIP LUER TIP
5222662 .366"ID x 24 ELEMENTS, 8.84"L, STEPPED TIP
5222668 .497"ID x 18 ELEMENTS, 9.08"L, STEPPED TIP
|
| |
|
