If you are setting up in an area without air, consider our
portable air source, the Silent Benchtop
Compressor. It will generally satisfy the needs of a small benchtop
dispenser and 1 liter or 1 pound pressure pot. Consult us for larger
compressors if you need a bigger tank.
With the air supply feed set on low, and the material
feed line connected from the pressure pot to the valve, the air lines from
the controller to the valve secure, set the controller switch to manual and
recheck the connections.
Slowly bring up
the pressure as you experiment with the controller in manual mode before
using time/pressure settings.
When you are satisfied the air and feed
lines are secured properly, fit the syringe or valve to the adapter head or
valve line and begin dispensing.
Part #
Description
7011014
2 gallon
Pressure pot
7011015
O-ring, Teflon
Encapsulated Viton for tank
7011016
2 gallon SS
Pressure pot - open type design with liners
7011017
Liner for 2
gallon tank
7011018
2 gallon SS
Pressure pot - open - with liners and agitator
For a typical valve
setup, click here.
|
