Dispensers   Valves   Robots   Tanks   UV Cure   Dispensing Syringes   Needles   Dual Packs   Cartridges    

   

 

    
Mixer Accessories  
 


About IDS

Home
 Price List
Quotes
Products
Ordering
 Site Map
 Applications

Dispensers

Syringe Gun
Foot Pedal
 Air Only Dispenser
Analog Dispenser  
Digital Dispenser
 Dual Gauge Dispenser Fully Digital Dispenser Dual Syringe Dispenser High Volume Dispenser Air Free Dispenser
 Vacuum Pick-up Pen Peristaltic Pump
 Silent Air Compressor Pail Dispenser
 Syringe Filling Station Finger Switch Accessories

Dispense Valves

Valve Finder Guide DispenseFinder©
 Valve Controller
 Front Closing Valve Spool Valve
 Spray Valve
 Manual Diaphragm
 MOD Diaphragm Valve Diaphragm Valves Metering Valves
 Pinch Tube Valve
 Auger Valves
 Auger Controller
 Twin Valve
 Dispense Stands
 Valve Handles

Reservoirs

1 Pound Reservoir
 1 Liter Reservoir
 2 Gallon Reservoir
 5 Gallon Reservoir
 10 Gallon Reservoir

Robots

Economy Stepper
Economy Flex
 200MM Stepper
300MM Stepper
 400MM Stepper
 500MM Stepper
 SCARA Stepper
 Economy Stepper
 Cartesian Servo
 Servo Gantry
 Servo SCARA
 Flexible Rotary
 Light Curtain
 Robot Vision

 

 

Static-mixing Nozzle Accessories

Luer Lock Adapters

Allows easy attachment of dispensing needles for precise application of two-component adhesives.

These Luer Lock Adapters easily self-thread onto the stepped end of the mixers. Adapters fit most standard needles.

5102017 (white)
5mm - Luer Adapter for .657 ID Bell & .197 ID and for .625 ID Bell & .197 ID shafts.
5102022 (grey)
6 & 8mm - Luer Adapter for  .250 ID, .315 ID with either .625 ID Bell or .657 ID Bell.
5102027 (black)
10mm - Luer Adapter for .394 ID Shaft and either .625 ID Bell or .657 ID Bell.

Nozzle retaining nuts
 
Part Description
5101552 Nozzle Retaining Nut - I.D. 5-8mm
5101556 Nozzle Retaining Nut - I.D. 10mm
5101560 Nozzle Retaining Nut - I.D. 13mm

How to order

Let us help select the right system for your application. Either call, fax or email the questionnaire and we will prepare a customized proposal for your meter-mix requirements.
 
    Shrouds

Higher pressures require shrouds. If not used, the mixer housing can expand, allowing the catalyst or resin components to bypass the mixer elements and stream down the inner housing wall, preventing an optimal mixture.

Good for epoxy, urethane, silicone and chemical dispensing, can be used with static mixers on all meter mix machines. Shrouds should be used at all times for safety reasons. Shrouds are made of aluminum with an anodized finish.

Order

5111100 7/8"-9 UNC - use with yellow or blue mixers 5101382 or 5101294
5111101 7/8"-14 UNC - use with yellow or blue mixers 5101382 or 5101294
5111102 7/8"-9 UNC - use with yellow or blue mixers 5101302 or 5101390
5111103 7/8"-14 UNC - use with yellow or blue mixers 5101302 or 5101390
5111105 7/8"-9 UNC - use with yellow or blue mixers 5101310 or 5101398
5111106 7/8"-14 UNC - use with yellow or blue mixers 5101310 or 5101398
5111107 7/8"-9 UNC - use with yellow or blue mixers 5101406 or 5101318
5111108 7/8"-14 UNC - use with yellow or blue mixers 5101406 or 5101318
5111114 7/8"-9 UNC - use with yellow or blue mixers 5101430 or 5101334
5111115 7/8"-14 UNC - use with yellow or blue mixers 5101430 or 5101334
5111116 7/8"-9 UNC - use with yellow or blue mixers 5101342 or 5101438
5111117 7/8"-14 UNC - use with yellow or blue mixers 5101342 or 5101438
5111119 7/8"-9 UNC - use with yellow or blue mixers 5101446 or 5101350
5111120 7/8"-14 UNC - use with yellow or blue mixers 5101446 or 5101350
5111121 7/8"-9 UNC - use with yellow or blue mixers 5101358 or 5101454
5111122 7/8"-14 UNC - use with yellow or blue mixers 5101358 or 5101454
5111126 7/8"-9 UNC - use with yellow or blue mixers 5101462 or 5101366
5111128 7/8"-14 UNC - use with yellow or blue mixers 5101462 or 5101366
5111130 7/8"-9 UNC - use with yellow or blue mixers 5101374 or 5101470
5111132 7/8"-14 UNC - use with yellow or blue mixers 5101374 or 5101470

 

 

 

 

 

 


ReadyMax UV

Program Flood
Economy Flood
 OvenCure
UV Conveyer
Flood Meter
 Flood Accessories
 UV Spot
UV Spot Meter
Spot Accessories
UV Accessories

Manual Syringes

Luer Lock
Luer Slip
Polycarbonate
Syringe Volumes

Pneumatic Syringes

Pneumatic Syringes
 Pneumatic Pistons
 Syringe Tip Caps
 End Caps
 Finger Switch
 Syringe Adapters
 Air Free Syringes
Syringe Volumes

Needles & Tips

All Metal Reusable
 Medical Grade Reusable
Thin Wall Precision
 Precision Disposable
 Economy Disposable
 45° Bent Needles
 90° Bent Needles
 Aluminum Needles
 Crimped Needles
Tapered Tips
Flexible Tips
 Teflon Needles 
 Oval Needles
Brush Tips

Single Cartridges

Manual Guns
Pneumatic Guns
Syringe Filler
 Cartridges
Cartridge Nozzles
Spreader Nozzles
 End & Tip Caps
Small Stands
Larger Stands
 Cartridge Accessories
 Cartridge Volumes

Dual Cartridge Guns and Mixers

50ML Guns & Mixers
2000ML Guns & Mixers
 400ML Guns & Mixers

Custom Packaging

1 Component Materials,
2 Component Materials,
 Equipment,
Bulk Dispensing

 





 
 
 

Email to: service@dispensinglink.com       Copyright © IDS 2008 All rights reserved.        Disclaimer       
Specifications are subject to change.  IDS is not responsible for discrepancies or errors due to typographic errors.
Integrated Dispensing Solutions ● 5311 Derry Avenue ● Building D ● Agoura Hills CA 91301 ● Ph (818) 597-4300 ● Fax (818) 597-4301