|
Positive Displacement Metering Valves for thin to thick
materials and micro to small shots.
Designed for precision,
light weight design are suitable for
benchtop or
automatic applications. Shot sizes
are fine tuned by turning the
adjustment knob at the top. For a typical valve
setup, click here.
For details, specifications and features, click on pictures
in the left column or on the links provided in the right hand overview
column. |
|
In this Category:
Micro Valve
Mini Meter Valve
Hi Volume Meter
Micro Mini Meter
Other Valves
You may also be
interested in:
Dispensers
Valve Controller
Dispense Valves
Reservoirs
Robot
Platform
Also of interest;
Precision Needles
Needle Nozzles
Thin Wall tips
Dispensing
Help
Doming & Potting
Solder Dispensing
Solder Mask |
|
 |
The
7050000
Micro
Metering Valve
with
Micrometer Adjust
(0.0002 - 0.0022 cc) is designed to
dispense extremely small, precise volumes. Two air ports in the air section
operate a piston, which retracts the needle inside
the fluid section and moves
it back for each shot...more |
|
|
 |
7052000
Micro-Mini Valve
w/o Adjust (0.0015-0.012 cc)
also available as
7052001 Micro-Mini Valve with
Micrometer Adjust (0.0015 - 0.012 cc)
shown left. Unique divorced valve design prevents fluid contamination of the
air section for precise metering...more |
|
|
 |
The
7053000
Mini Metering Valve
(0.010 - 0.145 cc) is a rod displacement, metering valve with two
integral check valves in the fluid section
to control the flow of material in and out of the valve.
Designed to dispense
small to medium fluid volumes with a high degree
of precision...more |
|
|
 |
7054000
Large Volume Metering Valve (0.15 - 4.5 cc)
is a single acting metering valve used for dispensing
larger metered shots of a variety of fluids.
The 7054000 is an excellent solution for small volume potting
and beads, and a repeatable volume
of material...more |
|
 |
5900011VC
Valve Controller (available
in
High and
Low PSI Models)
is suitable for
the complete line of IntelliSpense™
handheld or automation valves.
For a typical valve
setup,
click here.
Use with
Metering Valves,
Front Closing Valves,
AMD Diaphragm Valves
and
Pinch Tube
valves...more |
|
|
To feed any IDS valve,
choose from our dispensing syringes,
(to feed thin to medium materials in very small shots) our
single cartridges, (for
medium to thicker materials in smaller shots or beads) or for
large volume capacity, order one of our
reservoirs (for thin
to medium materials) or one of our
pail dispenser units,
for
thicker materials.
Drawings for;
Micro Valve
(0.0002 - 0.0022cc/ml)
Micro-Mini Valve (0.0015 - 0.012cc/ml)
Mini Valve (0.010 - 0.145cc/ml)
Positive Displacement
Metering Valve (0.15 - 4.5cc/ml)
|
|
