|
| |
 |
The Benchtop Pail Dispenser
(shown, left) pump extrudes high viscosity
material directly from a pre-filled can. Suitable for automatic and
semi-automatic controlled dispensing applications which require a constant
supply of quality, air-free material.
Auto and semi-automatic Pail Dispenser
extrudes material under pressure directly from a
bulk source.
The extruder pump bodies are fitted with a wiper-plate that
seals and follows the material as the level drops to wipe the can,
eliminating waste.
Fluid is pressure-fed by to a valve, mounted to a robot, operator-held
with a gun holder or stand. |
|
Also in this Category:
Syringe Gun
Flux Pens
Syringe Filler
Pail Dispenser
Silent Compressor
Accessories
You may also need:
Syringes
Tip Caps
End
Caps
Syringe
Adater
Also related:
Cartridges
Cartridge Nozzles
Spreader
Nozzles
End & Tip Caps
Small Stands
Larger Stands
Accessories
Dispensing Help
Doming & Potting
Solder Dispensing
Solder Mask
Premixed/Frozen
|
The valve is
actuated by a valve controller.
Valve is not included with the
Benchtop Pail Dispenser.
We also carry dispensers for drum or pail dispensing
(see below) and
cartridge dispensers range from
manual to semi-automated
workstations.
Benchtop Pail Dispenser Features
Material delivered air-free
Simple load mechanism provides easy cleaning
Teflon, Viton and PEEK seals for wetted parts
No need to transfer material which avoids waste
Attaches to valves and other automatic systems
Specifications for Benchtop Model (shown above)
Size base:
8.46 x
17.32
Height
adjustment:
21.65
min - 28.35 max
Weight:
28lbs
Air input pressure:
35 -
100 psi
Maximum output pressure:
850
psi
Fluid viscosity range:
10,000
- 600,000 cps
Volume
per stroke:
5cc
(0.17 oz.)
Recommended pump speed:
40cpm
Maximum pump speed:
60cpm
Stroke length:
3/4 (19mm)
Max. operating temperature:
50ºC
Air inlet size:
1/4
NPT (f)
Fluid outlet size:
1/4
NPT (f)
Wetted parts:
304 and 17-4 pH SS, Teflon, Viton, PEEK
Sound pressure level:
64.12
dB (A) @ 40cpm
Sound power level:
70.84
dB(A) @ 40cpm
IDS
pail pump kits come with all of the necessary hoses, fittings and
connectors to get the job right and to get you up and running
immediately. The systems are available in a range of pump ratios for
materials that medium to thick. If your material is very thin, we
might recommend a
pressure pot and a
valve system.
IDS Part # Extrusion Pump Systems for Pail and Drum
Dispensing
6661110
Benchtop Pail Pump - 110 Volt
6661111
Benchtop Pail Pump - 220 Volt
6661112 Quart
Wiper (following plate)
6661113 Gallon
Wiper (following plate)
6011100
8.5:1 for 300ml (1/10th gal) cart w/
regulator, gauge, hose
6011103
2:1
pump 5 gallon/20 liter with agitator and lid assembly
6011101
23:1
pump 5 gallon/20 liter w/regulators, gauges, hoses
6011101-M
23:1
Med Grade for 5 gal/20 liter w/regulators, gauges, hoses
6011101-46
46:1
ratio for 5 gallon/20 liter regulators, gauges, hoses
6011105
2:1
bung pump, cover, pneumatic lift, fittings, regulators
6011104-20
20:1
ratio 55 gallon drum regulators, gauges and hoses
6011104-34
34:1
ratio 55 gallon drum regulators, gauges and hoses
6011104-55
55:1
ratio 55 gallon drum regulators, gauges and hoses
|
|
| |
|
