The un-timed air output (air will push out material for as long as the pedal or switch is activated) to the plunger is triggered by operator or controller instead of a built in timer.

Setup

• Connect the Air Pressure Connector on the back of the system to the nearest air compressor line.
• Connect the Foot Pedal on the back of the system.
• Fill the dispensing barrel with adhesive into the correct barrel adapter.
• Uses 3, 5, 10cc/ml and 30/55cc/ml syringes and syringe adapters, available separately. See below for more information.
• Connect your chosen syringe adapter to the front of the system.
• Auto-adjusting power supply will accommodate 110V-230V voltage.
• Select the appropriate needle from the starter kit and adjust air pressure and vacuum until you have appropriate size dots or beads.
• Pull out regulator and adjust air pressure until desired pressure is set; push in and lock to set the pressure.

Each IntelliSpense™ Air Only Dispenser Package contains:

• IntelliSpense™ Air Only Dispenser
• Power Cord
• Foot Pedal

*Air only package does not contain accessories. Order the necessary adapter heads, syringes, needles and tips separately.

5101284AO    Air Only Dispenser.

*Air only package does not contain accessories. Order the necessary adapter heads, syringes, needles and tips separately.

All Luer Slip and Luer Lock Syringes have industry-standard Luer Nipples, which are 5/32“ OD and 1/8“ ID. IntelliSpense Needles will be functional with all IntelliSpense™ Syringes, Manual, Pneumatic or Air Free, as well as any other brand of standard Luer Lock or Luer Slip Syringe.

1 cc is equivalent to 1 ml. 1 teaspoonful is equivalent to 5 ml (or 5cc).
3 teaspoonfuls are equivalent to 1 tablespoonful. 1 tablespoonful is equivalent to 15 ml (or 15cc). 1 ounce is equivalent to 30 ml (or 30cc).