|
| |
|
Dispensing Cyanoacrylate, a variety of equipment is available
for dispensing these materials. If you are using a Cyanoacrylate
or anaerobic adhesives, proceed
with caution! Generally speaking, CA can
be dispensed with pinch tube valves,
manual or
automatic diaphragm valves for
robotic or semi-automatic dispensing.
Always use
genuine Teflon tips and specially
constructed pressure chambers.
For details, specifications and features, click on pictures
in the left column or on the links provided in the right hand overview
column. |
|
In this Category:
MOD Diaphragm
AMD Diaphragm
Auto Diaphragm
Dual Acting
Other Valves
You may also be
interested in:
Dispensers
Valve Controller
Dispense Valves
Reservoirs
Robot
Platform
Also of interest;
Precision Needles
Needle Nozzles
Thin Wall tips
Dispensing
Help
Doming & Potting
Solder Dispensing
Solder Mask |
 |
Auto Diaphragm Valve,
for thin materials, for use in full automation,
(left) is ideal
for materials, like
Cyanoacrylates
and other low to medium viscosity fluids
that require a diaphragm
design in automation...more |
 |
Spring Assisted CA Valve
is similar in operation to the valve
above, but the 7040000 high viscosity,
dual acting diaphragm valve
(left) is designed
specifically for automated solutions and for dot,
bead, and potting
with higher viscosity materials...more |
|
 |
The
Automatic Manual Diaphragm valve
(shown left) is
ideal for dispensing low to medium
viscosity fluids in a safe, ergonomic, hand held
operation.
It is
used with a
valve
controller for activation by foot pedal.
Perfect for semi-automation of operator
assisted dot,
bead, and potting applications...more |
|
 |
Manually Operated
Diaphragm Valve is ideal for CA and other low
to medium viscosity fluids, in operator applied manual operations only. For applications
with a controller, choose the AMD
valve, above.
Holding the lever down on the MOD wand will apply material, a simple lift of the finger from
the lever
(shown left) will cause the diaphragm to close.
...more |
|
|
| |
|
