 |
The Economy Teach Pendant is designed for simplicity
and ease of use. With basic instruction, the Economy Robots produce
sophisticated results.
The
following setup commands are the most used:
-
Dispense End
Setup
-
Point Dispense
Setup
-
Line Dispense
Setup
-
Line Speed
-
Z Clearance
-
Retract Setup
-
Adjust
Position Setup
|
|
In this Category:
200MM Economy
300MM Economy
400MM Economy
Teach Pendant
Other Robots
You may also be
interested in:
Dispensers
Valve Controller
Dispense Valves
Reservoirs
Robot
Platform
Also of interest;
Precision Needles
Needle Nozzles
Thin Wall tips
Dispensing
Help
Doming & Potting
Solder Dispensing
Solder Mask |
|
There are several functions assigned to most keys on the Teach pendant.
When a key is pressed alone, the function shown in the white colored
area on the key is executed. For example, MENU 1,
MENU 2, and Setup are the default key functions,
which are executed when that key is pressed alone. To access the
function shown in the blue area at the top of a key, press and release
the Shift key first, then press the desired key. For example, to
select the Speed function, press and release Shift, then
press the Speed key.
When a number is required, the teach pendant will automatically switch
to numeric entry mode. The number represented by each key is shown in
the lower right corner of the key.
Systems
include a Teach Pendant, Robot, Syringe
Holder and all of the necessary cables needed to get started
immediately.
IDS Part # Economy Benchtop
Teach Pendant
5554000TP Teach Pendant for Economy Robots
(Replacement)
|
