Dispensers   Valves   Robots   Tanks   UV Cure   Dispensing Syringes   Needles   Dual Packs   Cartridges    

   

 

    
Meter/Mix/Dispense  
 


About IDS

Home
 Price List
Quotes
Products
Ordering
 Site Map
 Applications

Dispensers

Syringe Gun
Foot Pedal
 Air Only Dispenser
Analog Dispenser  
Digital Dispenser
 Dual Gauge Dispenser Fully Digital Dispenser Dual Syringe Dispenser High Volume Dispenser Air Free Dispenser
 Vacuum Pick-up Pen Peristaltic Pump
 Silent Air Compressor Pail Dispenser
 Syringe Filling Station Finger Switch Accessories

Dispense Valves

Valve Finder Guide DispenseFinder©
 Valve Controller
 Front Closing Valve Spool Valve
 Spray Valve
 Manual Diaphragm
 MOD Diaphragm Valve Diaphragm Valves Metering Valves
 Pinch Tube Valve
 Auger Valves
 Auger Controller
 Twin Valve
 Dispense Stands
 Valve Handles

Reservoirs

1 Pound Reservoir
 1 Liter Reservoir
 2 Gallon Reservoir
 5 Gallon Reservoir
 10 Gallon Reservoir

Robots

Economy Stepper
Economy Flex
 200MM Stepper
300MM Stepper
 400MM Stepper
 500MM Stepper
 SCARA Stepper
 Economy Stepper
 Cartesian Servo
 Servo Gantry
 Servo SCARA
 Flexible Rotary
 Light Curtain
 Robot Vision

 

 

Meter/Mix/Dispense or Pre-Mixed and Frozen?

If you are using a single component material or a two- or multi-part, your IDS representative can help to select the right equipment and make sure it is packaged properly.

 

In the event you require a two-part epoxy or multi-part adhesive, we can offer a service to provide a pre-mixed
and frozen alternative.

 

  




Mount an air free
BiPack dispenser and a
UV spot on a robot and
enjoy the perfect cure
 with any UV material
in easy to use
disposable syringes!
 

Call IDS service
for application assistance or
click here
for the dual component/custom equipment quote sheet.

IDS can help you determine the best and most
cost effective way
to deliver the formula you have chosen.


Shipped in a specially constructed container, the material can be kept in our own IDS brand industrial freezer until ready to use. You simply remove the syringe, allow it to thaw and shoot. This alternative is practical with two component systems with a work life of more than thirty minutes.
Mixing Methods

If you use a meter/mix/dispense system, you will need disposable Static mixers - which can be either static or dynamic.
 
Static mixers have no moving parts. They contain fixed, geometrically shaped elements that act as flow-splitting and shear-energy-creating devices for the materials that travel through them. Static mixers are usually either plastic or metal. They work well if the ratio and viscosity ranges of the two materials to be mixed are not too wide.

In dynamic mixers, materials are rotated with an auger or paddle within a mixing chamber by means of rotary air, electric or hydraulic motors. The material passes into a chamber with a rotating element. Higher mixing shear is created, providing better mixing. Most dynamic mixers must be thoroughly cleaned after use, which takes time and exposes workers to hazardous waste. Typically, these mechanical mixers require solvent flush of the chamber. However, a hybrid dispense head is available that combines dynamic mixing with solvent-free mix chambers.
 

 


ReadyMax UV

Program Flood
Economy Flood
 OvenCure
UV Conveyer
Flood Meter
 Flood Accessories
 UV Spot
UV Spot Meter
Spot Accessories
UV Accessories

Manual Syringes

Luer Lock
Luer Slip
Polycarbonate
Syringe Volumes

Pneumatic Syringes

Pneumatic Syringes
 Pneumatic Pistons
 Syringe Tip Caps
 End Caps
 Finger Switch
 Syringe Adapters
 Air Free Syringes
Syringe Volumes

Needles & Tips

All Metal Reusable
 Medical Grade Reusable
Thin Wall Precision
 Precision Disposable
 Economy Disposable
 45° Bent Needles
 90° Bent Needles
 Aluminum Needles
 Crimped Needles
Tapered Tips
Flexible Tips
 Teflon Needles 
 Oval Needles
Brush Tips

Single Cartridges

Manual Guns
Pneumatic Guns
Syringe Filler
 Cartridges
Cartridge Nozzles
Spreader Nozzles
 End & Tip Caps
Small Stands
Larger Stands
 Cartridge Accessories
 Cartridge Volumes

Dual Cartridge Guns and Mixers

50ML Guns & Mixers
2000ML Guns & Mixers
 400ML Guns & Mixers

Custom Packaging

1 Component Materials,
2 Component Materials,
 Equipment,
Bulk Dispensing

 





 
 
 

Email to: service@dispensinglink.com       Copyright © IDS 2008 All rights reserved.        Disclaimer       
Specifications are subject to change.  IDS is not responsible for discrepancies or errors due to typographic errors.
Integrated Dispensing Solutions ● 5311 Derry Avenue ● Building D ● Agoura Hills CA 91301 ● Ph (818) 597-4300 ● Fax (818) 597-4301