|
| |
 |
The IntelliSpense™ PolyCarb Syringe barrel is made
from crystal-clear polycarbonate and features an ABS push rod. This
syringe can withstand significant pressure, allowing for rapid
dispensing of viscous fluids under vigorous conditions.
IDS Polycarbonate syringes are used to facilitate administration or
withdrawal of fluids and are especially effective when used with
a Syringe Pump. No matter what the use, these syringes make
working with fluids easier. |
|
In this Category:
Pneumatic Syringes
Manual Syringes
Polycarb Syringes
Sample Kits
Other Syringes
You may also be
interested in:
Dispensers
Precision Needles
Needle Nozzles
Thin Wall tips
Dispensing Help
Doming & Potting
Solder Dispensing
Solder Mask
Also of interest;
Precision Needles
Needle Nozzles
Thin Wall tips
Dispensing
Help
Doming & Potting
Solder Dispensing
Solder Mask |
|
The IntelliSpense™ PolyCarb Syringe Barrel is
shatter-resistant and perfectly clear, which in turn makes it very easy
to detect air bubbles and fluid levels. The syringes are certified to be
latex-free (to avoid cross contamination)
autoclavable and are naturally resistant to most fluids*.
There is a lubricant used in the barrel,
Polydimethylsiloxane (PDMS), which is a widely used
silicon-based organic polymer. These syringes are available in 3, 6, 10,
20, 30 and 60 ml/cc sizes (please see
dimensions below)
and are sold in
non-sterile packaging, 25 units per box, 4 boxes per
case.
Features
-
Smooth piston/barrel interface makes easy low pressure deposits
-
Finger grips provide more control over delivery
-
Air
tight luer-lock connection decreases leaks
-
The
detection of air bubbles and fluid levels is made simpler
-
Plunger
travel in the syringe barrel is extremely smooth and effortless
The IntelliSpense™ PolyCarb Syringe is shatter-resistant and perfectly clear, which in turn makes it very easy
to detect air bubbles and to gauge fluid levels. They are certified to
be latex-free and are naturally resistant to most fluids*. They are
available in 3, 6, 10, 20, 30 and 60 ml/cc sizes.
All IntelliSpense™ PolyCarb Syringes are available
with a Luer Lock or Luer Slip hub, which will
not easily break or leak and work with any of our
IntelliSpense brand needles or tips. The plunger and tip caps are
bright yellow to differentiate them from our
IntelliSpense™ Polyethylene
Manual
Syringes.
|
|
|
|
Part # |
PolyCarb Luer Lock
Syringe |
|
|
|
|
9991330PC |
3cc/ml PolyCarb Luer Lock
Syringe - Box of 25 |
|
9991331PC |
5cc/ml PolyCarb Luer Lock
Syringe - Box of
25 |
|
9991332PC |
10cc/ml PolyCarb Luer Lock
Syringe - Box of
25 |
|
9991333PC |
20cc/ml PolyCarb Luer Lock
Syringe - Box of
25 |
|
9991334PC |
30cc/ml PolyCarb Luer Lock
Syringe - Box
of 25 |
|
9991335PC |
60cc/ml PolyCarb Luer Lock
Syringe - Box
of 25 |
|
|
|
|
|
Part # |
PolyCarb Luer Slip
Syringe* |
|
|
|
|
9991338PC |
3cc/ml PolyCarb Luer Slip
Syringe - Box of 25 |
|
9991339PC |
5cc/ml PolyCarb Luer Slip
Syringe - Box of 25 |
|
9991340PC |
10cc/ml PolyCarb Luer Slip
Syringe - Box of 25 |
|
9991341PC |
20cc/ml PolyCarb Luer Slip
Syringe - Box of 25 |
|
9991342PC |
30cc/ml PolyCarb Luer Slip
Syringe - Box of 25 |
|
9991343PC |
60cc/ml PolyCarb Luer Slip
Syringe - Box of 25 |
|
|
|
Part # |
PolyCarb Tip Caps and Adapters |
|
|
|
|
CMF3456 |
Finger Snap Luer Lock Ring, Clear PolyCarb |
|
CMF3458 |
Female Luer Lug Style Coupler, Clear PolyCarb |
|
CMF3459 |
Female Luer Lug Style Elbow, Clear PolyCarb |
|
CMF3465 |
Female Luer Thread Style Coupler, Clear PolyCarb |
|
CMF3466 |
Female Luer Thread Style Elbow, Clear PolyCarb |
|
CMF3467 |
Female Luer Thread Style Cap, Clear PolyCarb |
|
CMF3469 |
Female Luer Lug Style Cap with Tether Loop, Clear |
|
CMF3470 |
Female Luer Lug Style Tee, Clear PolyCarb |
|
CMF3486 |
Male Luer Coupler (may be used with CMF3456) |
|
CMF3491 |
Male Luer Slip Coupler, Clear Polycarbonate |
|
CMF3498 |
Male Luer Plug, Closed at Tether Loop |
| |
|
|
*Note: Slip luer connectors are available upon
special request only. Please allow up to six weeks for delivery.
Polycarbonates
are not
considered safe for some materials, including; Acetone, Acrylonitrile, Ammonia, Amyl acetate, Benzene,
Bromine, Butyl acetate, Sodium hydroxide, Chloroform, Dimethylformamide,
Concentrated hydrochloric acid, concentrated hydrofluoric acid, Iodine,
Methanol, Methyl ethyl ketone, Styrene, Tetrachloroethylene, Toluene,
Concentrated sulfuric acid, Xylene, or Cyanoacrylate monomers.
This list is not
meant to be definitive or
all-inclusive. Users must determine suitability for their own
materials.
|
 |
 |
 |
 |
 |
|
Syringe
Size
(CC/ML) |
A
Total
Length |
B
Outside
Diameter |
C
Inside
Diameter |
D
Tab
Length |
E
Tab
Width |
|
|
3 |
3
1/8” |
13/16” |
5/16” |
11/16” |
11/16” |
|
6 |
3
5/16” |
5/8” |
1/2” |
17/16” |
111/16” |
|
10 |
3
1/2” |
3/4” |
5/8” |
11/2” |
13/16“ |
|
20 |
3
3/4” |
7/8” |
3/4" |
1
5/8” |
1” |
|
30 |
41/16” |
1” |
5/16” |
113/16” |
11/8” |
|
60 |
55/8”” |
13/16” |
1
1/16” |
21/8” |
11/4” |
| |
|
