|
| |
 |
Solder Mask Dispenser
Simple semi-automated solution
EZMasker precision timed solder
mask dispenser system reduces hand fatigue and eliminates
overfill by delivering a reliable timed shot.
Don't risk operator injury or fatigue and eliminate waste and rework caused
by the old pinch tube style mask systems.
Choose from foot controlled or finger
switch with optional foot pedal. Simple to set up and operate - place bottle of mask into the anodized aluminum container, insert fluid feed line and begin. |
|
In this Category:
Dispensing HelpSolder Dispensing
Cyanoacrylate
Solder Mask
Conformal Coating
Syringe
Volumes
Premixed/Frozen
Doming & Potting
Solder Dispensing
Solder Mask
Dispensing
Help
What Will a
Cartridge Hold?
You may also be
interested in:
Dispensers
Valve Controller
Dispense Valves
Reservoirs
Robot
Platform
Also of interest;
Precision Needles
Needle Nozzles
Thin Wall tips
Dispensing
Help
Doming & Potting
Solder Dispensing
Solder Mask |
 |
Order with optional
1 gallon reservoir, and
pour the material into the tank (liner optional)
and keep the material safe and fresh.
The precise valve and clean, snap cut-off
will deliver your desired amount with simple timed settings.
The
ergonomic manual switch can be used,
or the unit can be purchased with simple foot pedal operation, leaving both
hands free.
|
|
Order with both!
The one gallon tank option is complete
with all fittings and required hose and tube
lengths. Call (818) 597-4300 or send email to:
service@dispensinglink.com for a quote.
System #1 – Controlled by foot
switch only.
Complete Manual Dispense System, Includes:
- Diaphragm Dispense Valve
- 1 Pound (500gr.) bottle Pressure Reservoir
- UV Safe, Teflon Material Tubing
- All Necessary Material Fittings
- All Air Lines and Air Fittings
Order
7020010SM* - Solder mask dispenser with
timed dispense
-OR-
System #2 – Controlled by foot
or finger switch.
- Diaphragm Dispense Valve
- Electric Finger Switch
- Digital Valve Controller
- 1 Pound (500gr.) bottle Pressure Reservoir
- UV Safe, Teflon Material Tubing
- All Necessary Material Fittings
- All Air Lines and Air Fittings
Order
7020012SM* -
Solder mask dispenser with timed dispense and finger
switch.
* Increase capacity by adding 1 gallon
reservoir.
Just add -1 gal to part number.
|
| |
|
