IntelliSpense™ Manual Syringes
are complete units, ready to use. As shown below,
they include syringe barrels (1CC to 60CC),
plungers (push rods
inside the barrel) and pistons (black
neoprene piece that the push rod pushes
to move the material forward).
There is a lubricant used in the barrel,
(PDMS), which is
a silicone. Manual Syringes are
If you require a silicone free syringe, use pneumatic Syringes
with an inexpensive Manual Syringe Gun.
inexpensive plastic guns use industry standard
The syringe gun
not for use with manual syringes, as it has
its own plunger rod and adapter head built in.
IDS Luer Slip and Luer Lock Manual and Pneumatic Syringes have
industry-standard Luer Nipples, which are 5/32“ OD and 1/8“ ID.
IntelliSpense Needles will be functional with all
Manual, or Pneumatic, or any
standard Luer Lock™ or Luer Slip Syringe.
We also carry dispensers for drum or
cartridge dispensers range from
manual to semi-automated
In this Category:
You may also need:
Needles & Tips
Thin Wall tips
Also of interest;
Doming & Potting
Overview - Click on
Specifications, Features, and more...
Syringes are available
in PolyPro and in manual
for industrial use. Choose from Luer Lock or Luer Slip...more
are shatter-resistant and perfectly clear,
molded latex-free and
resistant to most fluids.
They have an ultra smooth glass like feel in
3, 6, 10, 20, 30 and 60 ml/cc sizes.
In boxes and bulk quantities...more
Pneumatic Syringes (polypropylene) for
industrial use... guaranteed silicone and chloride free,
designed to work with
are available. IDS
Syringes are available in clear,
amber, UV block and solid black,
packed in smaller units or packaged in bulk bags...more
Red or White Pneumatic Pistons
for most materials, for use with
or solid UV black syringes, in
dispensers or syringe
Available in bulk packs...more
Cartridge Needle Adapter
- Male Luer Lock Ring with 9/16" Hex to 1/4-18 NPT
Thread, in natural polypropylene.
This is used to attach any IDS dispense needle onto
any IDS cartridge. Use with
cartridges for a large syringe...more
End Caps are used for packaging, transportation or
partial use. Use for storage purposes only, should
not be used without a piston
Tip Caps when needed to cap off any of the IDS partially used syringes,
to seal off the small end of the syringe. Useful when needed for
interrupted use, for storage or shipping...more
cover the tip of the needle only to allow you to cap it off
without removing the entire needle from the
(or, Adapter Heads) are used with
to connect to a
These assemblies feature a unique tabbed connector for use with twist or
push lock units. If the unit you use has a push type connector,
remove the tabs. For a twist lock, push the end connector in and
with a Velcro belt. Triggers dispenser with a touch of the button.
Operator has a choice and
cord be extended 15' with optional cord...more
Pneumatic Syringes for industrial
use... guaranteed silicone and chloride free
and designed to work with
IDS and most industry standard
pneumatic dispensing equipment.
Please note that the
industrial syringes used in IDS dispensers are available in
3, 5, 10, 30 and 55cc/ml
syringe pistons for the 30cc/ml and 55cc/ml
are the same; the rest are made for the specific syringe size.
IDS needles and tips
are luer lock threaded and will work with any size syringe.
Manual Syringes are different from air driven pistons; choose them from
manual syringe section only. If using
solder paste or filled material, a pneumatic
(air driven) syringe dispenser has a tendency to separate.
Restrict use to 10cc/ml tubes, three quarters full, or use a
for cost cutting results on materials.
1 cc is equivalent to 1 ml. 1
teaspoonful is equivalent to 5 ml (or 5cc). 3 teaspoonfuls are equivalent to 1 tablespoonful. 1 tablespoonful is
equivalent to 15 ml (or 15cc). 1 ounce is equivalent to 30 ml (or 30cc).
For larger reservoirs, see our
low cost Cartridges. Available in sizes 2.5 oz to
20 oz. in size, these will
require a cartridge dispenser.