7052000 Micro-Mini Valve w/o Adjust (0.0015-0.012 cc)

7052200  Micro-Mini Metering Valve without micrometer (0.0015-0.012 cc) has a unique divorced valve design prevents fluid contamination of the air section. Inlet and outlet check valves for precise metering. Use in handheld and automated applications by integrating the head with any platform.

An excellent solution for minute volume dot dispensing utilizing a positive displacement metering system. The valve precisely measures a predetermined volume of material for highly reliable results. For a typical valve setup, click here.
Specifications

Dimensions:  See below.
Weight:  8 oz
Viscosity Range:  1 cps - Paste
Operating Air Pressure:  30-100 PSI
Maximum Fluid Pressure:  300 PSI
Wetted Parts:  Stainless steel, Kalrez® , Teflon® (Delrin)
Shot Size Range:  0.0015 cc to 0.0120 cc

Micro-Mini Metering Valve
7052000  Micro-Mini without Micrometer (0.0015-0.012 cc)

Valve Spare Part Kits
7052000 -SP   7052000 Spare Parts Kit
Features
  • 0.0015 cc to 0.0120 cc shot size.
  • Divorced valve design prevents material contamination of the air section.
  • Inlet and outlet check valves provide precise metering of material.
  • Adjustable stroke permits shot size modification.
  • Stainless steel fluid section for optimum material compatibility.
  • Lightweight aluminum air section.
7052000 = Micro-Mini Metering Valve without Micrometer (0.0015-0.012 cc)
$
950.00    
 
 

VALVE ONLY


​The 7052000 = Micro-Mini Metering Valve without Micrometer (0.0015-0.012 cc) is intended for use with low to medium viscosity materials. You also require a valve controller and reservoir. Contact IDS with questions.


Intended for high accuracy micro dot deposits.


Availability: Can range from 2 - 4 week build time. Need multiple units? Contact IDS directly for a quote. If you have never used this system with your material, be sure to confirm compatibility. Viscosity Range:  Depends On Reservoir - 1 cps - Paste

5900011VC = Pneumatic Valve Controller
$
995.00    
 
 
The 5900011VC  Pneumatic Valve Controller is intended for use with most IDS valves. The "A" and "B" outlet ports are used to provide air pressure to the valve, cycling it opened and closed. Along with a valve you will also require a reservoir.

Availability: Can range from 2 - 4 week build time. Need multiple units? Contact IDS directly for a quote. If you have never used this system, be sure to confirm compatibility.
7011010-S = Direct Syringe Mount Reservoir For Valves
$
325.00    
 
 
RESERVOIR ONLY

The 7011010-S = Direct Syringe Mount Reservoir For Valves Includes: Fluid Adapter, Syringe Air Adapter, 0-60psi Air Regulator & Gauge, Stand for Air Regulator and Weighted base. Does Not Include a Valve or a Valve Stand.

Availability: From 2 - 4 week build time. Need multiple units? Contact IDS directly for a quote. Note: Know your material! Always confirm compatibility.
7080006 = Adjustable Valve Stand
$
140.00    
 
 
VALVE STAND ONLY

The 7080006  = Adjustable Valve Stand​ is intended for use with all IDS valves

Availability: From 2 - 4 week build time. Need multiple units? Contact IDS directly for a quote. Note: Know your material! Always confirm compatibility.