Cartridge Pneumatic Adapters

Pneumatic Adapters for Cartridges consist of the Cap, Retainer and Air Line. They are intended for use with any dispensing system. Which cartridge size do you need? You can compare the dimensions of your cartridge to our empty cartridges here! Then match the cartridge size to the retainer size. The 1/10th gallon is the most common size found in a hardware store, but sometimes the packaging is unclear or only provides weight on the label. Make sure you choose the right retainer. All of our retainers are built to match our cartridges, but also work with most cartridges available on the market. Please make sure you contact IDS if you have questions.

Adapter Assembly For Use With Pneumatic Dispensing Systems

3232323RPKG = 1/10th Gallon (310 ML) Pneumatic Cartridge Adapter Assembly
$
145.00    
 
 
The IntelliSpense™ 1/10th Gallon (310 ML) Pneumatic Cartridge Adapter Assembly is all metal, intended for rugged applications. Includes the Retainer, cap and air line. Intended for use with the 5100804, 5101284, or 5101284DG dispensers or other dispensers or 1/4 od tube fittings.

Availability: Can range from in stock to 4 week build time. Need multiple units? Contact IDS directly for a quote.

Retainers, Caps, Stands And Related Spare Parts

Metal Cartridge retainers with heavy duty thread
Our rugged metal cartridge retainers (shown , left) with heavy duty threads, work with both Pneumatic and Handheld guns Cartridge Gunsto hold the filled cartridge securely in place. The Handler Pneumatic Cartridge Gun Set (shown above) and the Handler Manual Cartridge Gun accepts 2 1/2, 6, 8, 12 oz. and 1/10th Gallon threaded retainers that fit together to accept different sized cartridges, plungers and nozzles, which are ordered separately. See ordering information below.

Metal cartridge retainers (shown left) with heavy duty threads hold your cartridge securely in place. Fill Cartridge with material or insert your own pre-filled cartridges (also available as an IDS special service) remove the retainer from the handle, and slide the filled cartridge inside. Replace retainer by screwing in flush. Do not over tighten. The air volume inside the gun will ensure a positive seal and you will reduce the possibility of stripping threads.
8880114 = Pneumatic Retaining Cap And Gasket
$
77.00    
 
 
The 8880114 Pneumatic Retaining Cap And Gasket is intended for use with any IDS retainer. Requires a Retainer and a 8880359CA Air Supply Hose to attach to any IDS dispenser. The 1/4" Tube connection in the top makes for easy automation.

Availability: Normally in stock. Need multiple units? Contact IDS directly for a quote on build time.
3232333G = Gasket for IntelliSpense™ Pneumatic Cartridge Guns or Retaining Cap
$
8.00    
 
 
The IntelliSpense Handler™  series Pneumatic Cartridge Dispensing Guns and our Cap and Retainer assembly used in Cartridge Dispensing Stations.

Availability: Normally in stock. Need multiple units? Contact IDS directly for a quote on build time.
8880359CA = Air Supply Hose for IDS Dispensers to Retainer Cap
$
19.95    
 
 

The 8880359CA, 1/4" OD Air Supply Hose with twist lock adapter for IDS Dispensers to Retainer Cap is intended for use with any IDS dispenser to connect to the 8880114 pneumatic cap.


Availability: Normally in stock. Need multiple units? Contact IDS directly for a quote on build time.

3232329 = 2.5 oz. Retainer for 2.5 oz. cartridges.
$
66.00    
 
 
The 3232329, 2.5 oz. Retainer for 2.5 oz. volume cartridges is intended for use with any IDS cartridge handle or pneumatic cap. The retainer is built to fit the exact cartridge size.

Availability: Normally in stock. Need multiple units? Contact IDS directly for a quote on build time.
3232330 = 6 oz. Retainer for 6 oz. cartridges.
$
66.00    
 
 
The 3232330, 6 oz. Retainer for 6 oz. volume cartridges is intended for use with any IDS cartridge handle or pneumatic cap. The retainer is built to fit the exact cartridge size.

Availability: Normally in stock. Need multiple units? Contact IDS directly for a quote on build time.
3232331 = 8 oz. Retainer for 8 oz. cartridges.
$
66.00    
 
 
The 3232331, 8 oz. Retainer for 8 oz. volume cartridges is intended for use with any IDS cartridge handle or pneumatic cap. The retainer is built to fit the exact cartridge size.

Availability: Normally in stock. Need multiple units? Contact IDS directly for a quote on build time.
3232332 = 12 oz. Retainer for 12 oz. cartridges.
$
66.00    
 
 
The 3232332, 12 oz. Retainer for 12 oz. volume cartridges is intended for use with any IDS cartridge handle or pneumatic cap. The retainer is built to fit the exact cartridge size.

Availability: Normally in stock. Need multiple units? Contact IDS directly for a quote on build time.
7080008 = Cartridge Stand Only (Fits 2.5, 6, 8, and 12 ounce sizes only)
$
155.00    
 
 
The 7080008 cartridge stand only is intended to hold any IDS cartridge retainer in 2.5, 6, 8, and 12 ounce sizes only. Intended to hold a Retainer and Cap assembly for desktop use. RETAINER AND CAP NOT INCLUDED.

Availability: Normally 1-2 week build time. Need multiple units? Contact IDS directly for a quote on build time.
3232323R = 1/10th gallon (10.3 oz. or 310ml) Retainer
$
66.00    
 
 
The 3102333R, 1/10th gallon Retainer for 10.3 oz. volume cartridges is the most common size found in hardware stores in the US. It is intended for use with any IDS cartridge handle or pneumatic cap. The retainer is built to fit the exact cartridge size.

Availability: Normally in stock. Need multiple units? Contact IDS directly for a quote on build time.
7080008-110 = Cartridge Stand Only (Fits 1/10th gallon size only)
$
155.00    
 
 
The 7080008-110 cartridge stand only is intended to hold any IDS cartridge retainer in 2.5, 6, 8, and 12 ounce sizes only. Intended to hold a Retainer and Cap assembly for desktop use. RETAINER AND CAP NOT INCLUDED.

Availability: Normally 1-2 week build time. Need multiple units? Contact IDS directly for a quote on build time.