Pneumatic (Air Powered) Valve Controller

pneumatic valve controller














Valve controller available in both 100 PSI and 0-15 PSI versions for any material you need to dispense.
To feed any IDS valve, choose from our dispensing syringes, (to feed thin to medium materials in very small shots) our single cartridges, (for medium to thicker materials in smaller shots or beads) or for large volume capacity, order one of our reservoirs (for thin to medium materials) or one of our pail dispenser units, for thicker materials. Includes DB9 Connector that can give feedback to a robot or PLC. 

Economical and ergonomic operation for easy and safe manual dispensing by an operator or in automation, the Digital Valve Controller dispenses a wide range of adhesives, coatings, epoxies, and silicone. 

The all-digital push button timer offers a 0.01 - 99.99 second time range. 
Specifications

Timer: 0.01 sec - 99.99 sec
Cycle Initiation: Maintained or momentary
Repeat Accuracy: 0.5 ms (0.0005 sec)
Recycle Time: 12 ms (0.012 sec)
Time Setting Accuracy: +/- 2%
Dimensions: (8.50 in x 6.50 in x 3.62 in)
Weight: 8 lbs
Power: 115/230 VAC
Internal Voltage: 24 VDC
Air Input: 35-100 PSI • (2.5 - 6.9 bar)
Air Output: 1-100 PSI • (0.1 - 6.9 bar)
Certification: CE certified
IDS Part #             High Volume Valve Controllers

5900011VC           15-100PSI Digital Valve Controller with fittings 
5900011SVC11     0-15PSI  Spray Valve Controller with fittings 
5900011VCFP       Replacement Foot Pedal (Optional; one is supplied with the unit.)
5900011VC = Pneumatic Valve Controller
$
995.00    
 
 
The 5900011VC  Pneumatic Valve Controller is intended for use with most IDS valves. The "A" and "B" outlet ports are used to provide air pressure to the valve, cycling it opened and closed. Along with a valve you will also require a reservoir.

Availability: Can range from 2 - 4 week build time. Need multiple units? Contact IDS directly for a quote. If you have never used this system, be sure to confirm compatibility.