Valve Handles and Valve Stands

Picture
Pistol Grips and Dispensing Stands allow syringe barrels, cartridges, and valves to be securely mounted for use in any number of offline bench-top work stations. They are all specifically made for each application listed. A heavy-duty cast base is essential for precise alignment and positioning of barrels, valves, cartridges and retainers. An adjustable horizontal arm allows for z-axis adjustment. Dispensing stands allow syringe barrels, cartridges, and valves to be securely mounted for use in any number of offline bench-top work stations.  For a typical valve setup, click here.

To feed any IDS valve, choose from our dispensing syringes, (to feed thin to medium materials in very small shots) our single cartridges, (for medium to thicker materials in smaller shots or beads) or for large volume capacity, order one of our reservoirs (for thin to medium materials)or one of our pail dispenser units for thicker materials.

Valve Handles and Stands

Part #       Valve Stands 

7080006   Adjustable Valve Stand 
7080007   Adjustable Syringe Stand 
7080009   Metal Syringe Stand 
7080011   Manual Diaphragm Valve Stand
Part #     Valve Handles 

7080000   Pneumatic Handle Assembly
7080001   Electric Handle Assembly
7080002   Dummy Handle (No trigger)
7080003   Electric Switch, for Valves
7080004   Electric Switch, for CA Valves
7080005   Electric Grip Handle Assembly 
7080000-ST = Stand to hold pistol grip mounted valves.
$
290.00    
 
 

VALVE STAND ONLY - Valve And Pistol Grip Not Included.

The 7080000-ST is intended for use with the 7080000 Pneumatic Handle Assembly or the 7080001 Electric Handle Assembly.

Availability: From 2 - 4 week build time. Need multiple units? Contact IDS directly for a quote. Note: Know your material! Always confirm compatibility.

7080006 = Adjustable Valve Stand
$
155.00    
 
 
VALVE STAND ONLY

The 7080006  = Adjustable Valve Stand​ is intended for use with all IDS valves

Availability: From 2 - 4 week build time. Need multiple units? Contact IDS directly for a quote. Note: Know your material! Always confirm compatibility.
7080011 = Manual Diaphragm Valve Stand
$
170.00    
 
 

VALVE STAND ONLY - Valve Not Included.

The 7080011 Manual Diaphragm Valve Stand is intended for use with the 7020000 = Manual Diaphragm Valve. Stand includes purge cup to catch any drips of material.

Availability: From 2 - 4 week build time. Need multiple units? Contact IDS directly for a quote. Note: Know your material! Always confirm compatibility.

TFML169 = Black PTFE Material Line Used In IDS Valve Systems (Order Per Foot)
$
3.50    
 
 

ORDER THIS ITEM BY THE FOOT - Intended for use with most IDS valve systems. Please contact IDS with any questions. PTFE Line is 1/4" OD


Availability: From stock to 2 week build time.  Note: Know your material! Always confirm compatibility.

PEAL171 = Red Polyurethane Air Line Used In IDS Valve Systems (Order Per Foot)
$
3.50    
 
 

ORDER THIS ITEM BY THE FOOT - Intended for use with most IDS valve systems. Please contact IDS with any questions. Polyurethane air Line is 4MM OD


Availability: From stock to 2 week build time.  Note: Know your material! Always confirm compatibility.

PEAL170 = Blue Polyurethane Air Line Used In IDS Valve Systems (Order Per Foot)
$
3.50    
 
 

ORDER THIS ITEM BY THE FOOT - Intended for use with most IDS valve systems. Please contact IDS with any questions. Polyurethane air Line is 4MM OD


Availability: From stock to 2 week build time.  Note: Know your material! Always confirm compatibility.