High Volume Front Closing Valve

High Volume Front Closing Valve

The 5101293-HV Front Closing Valve is a versatile high volume dispensing valve for bead, dot, potting or encapsulation. A lightweight, compact design makes the 5101293-HV perfect for automated and handheld processes.This is an excellent all purpose, single material valve, used in a variety of applications, including beads, gaskets, shots large and small (using the micro version) potting and bonding. This valve is perfect for grease dispensing, lubricant dispensing valve, silicone dispensing. As always, be sure to check for material compatibility.

If the material is gritty, there is a carbide steel version available. The 5101293-HVC High Volume Front Closing Valve with Carbide Steel seats will last longer and not need to be re-seated as frequently as will a SS valve. Check with your formulator and make sure if Carbide is necessary.
The 5101293-HV Front Closing Valve has features including:
  • Stainless steel fluid body for superior material compatibility.
  • Divorced valve design prevents material contamination of the air body. 1/4” NPT fluid port allows for higher flow rates, adjustable flow control.
  • Reversible valve seat.
  • Spring-assisted valve closure for reliable cycle stops.
  • Compatible with all Luer-Lock needle tip designs.
5101293-HV Front Closing Valve Specifications

Dimensions:  7.9 in x 1.15 in x 1.15 in
Weight:  19 oz (1lb 3 oz)
Viscosity Range:  1 cps - Paste
Operating Air Pressure:  50-100 PSI
Maximum Fluid Pressure:  600 PSI
Wetted Parts:  Stainless Steel, Viton, PTFE*
*Options available, if required.
5101293-HV = Front Closing Dispense Valve, High Flow
$
875.00    
 
 

VALVE ONLY


The 5101293-HV = Front Closing Dispense Valve, High Flow is intended to be used with any pressurized reservoir. Requires a valve controller that can provide air pressure to open and close. These valves are steel and are not suggested for use with CA (Cyanoacrylate) material. ​


Availability: From 2 - 4 week build time. Need multiple units? Contact IDS directly for a quote. Note: Know your material! Always confirm compatibility. Viscosity Range: Depends on Reservoir, used for all viscosity 1 cps - Paste cps.

5101293-HVSP = Valve Spare Parts Kit For Front Closing Dispense Valve, High Flow
$
199.00    
 
 

5101293-HVSP = Valve Spare Parts Kit* for 5101293-HV

Front Closing Dispense Valve, High Flow ONLY. Do not order for other versions of valves. Restocking Fee Will Apply If Ordered In Error.

Availability: From 2 - 4 week build time. Need multiple units? Contact IDS directly for a quote. 

5900011VC = Pneumatic Valve Controller
$
1,090.00    
 
 
The 5900011VC  Pneumatic Valve Controller is intended for use with most IDS valves. The "A" and "B" outlet ports are used to provide air pressure to the valve, cycling it opened and closed. Along with a valve you will also require a reservoir.

Availability: Can range from 2 - 4 week build time. Need multiple units? Contact IDS directly for a quote. If you have never used this system, be sure to confirm compatibility.
7080006 = Adjustable Valve Stand
$
155.00    
 
 

VALVE STAND ONLY


The 7080006 = Adjustable Valve Stand​ is intended for use with mostIDS valves


Availability: From 2 - 4 week build time. Need multiple units? Contact IDS directly for a quote. Note: Know your material! Always confirm compatibility.

7011010-S = Direct Syringe Mount Reservoir For Valves
$
360.00    
 
 
RESERVOIR ONLY

The 7011010-S = Direct Syringe Mount Reservoir For Valves Includes: Fluid Adapter, Syringe Air Adapter, 0-60psi Air Regulator & Gauge, Stand for Air Regulator and Weighted base. Does Not Include a Valve or a Valve Stand.

Availability: From 2 - 4 week build time. Need multiple units? Contact IDS directly for a quote. Note: Know your material! Always confirm compatibility.
7011010-2L = 2 Liter Reservoir, regulator & gauge,
$
1,170.00    
 
 

RESERVOIR ONLY

The 7011010-2L = 2 Liter Reservoir, regulator & gauge, is intended to be used with any IDS Valve and most valves also require a valve controller.

REQUIRES A LINER - DO NOT DIRECT POUR. Most customers will use the bottle that the material comes in, set it directly inside, drop the feed tube in, and then pressurize.

Availability: From 2 - 4 week build time. Need multiple units? Contact IDS directly for a quote. Note: Know your material! Always confirm compatibility. Viscosity Range: 1 cps - 25,000 cps

IDS Part #
5101293-HV
5101293-HV-SP
5101293-HVC
5101293-HVC-SP
7080006
Description
Front Closing, high pressure valve.
5101292 SS Front Closing Valve Spare Parts Kit
High Volume Front Closing Valve with Carbide Steel
High Volume Carbide Valve Spare Parts Kit
Valve Stand