Syringe Adapters

​Related Items:

8880365 = 30/55 ML Syringe Adapter

$29.85

The 30/55 cc/ml Syringe Adapter Assembly (shown left) consists of a clear tubing with an adapter head on one end (which holds the syringe) to an adapter tab on the other end which fits into the dispenser. The adapter assembly that connects the syringe to the controller delivers the air supply to the piston inside the syringe. 


*Note: 30cc/ml and 55cc/ml use same adapter. Replacement O-Rings Available If Needed. EPR o-ring comes standard with adapter. Intended for use with Pneumatic Syringes (Air Powered) only!
Shop

8880363 = 10 ML Syringe Adapter

$26.40

The 10 cc/ml Adapter Assembly (shown left) consists of a clear tubing with an adapter head on one end (which holds the syringe) to an adapter tab on the other end which fits into the dispenser. The adapter assembly that connects the syringe to the controller delivers the air supply to the piston inside the syringe.


*Note: Replacement O-Rings Available If Needed. EPR o-ring comes standard with adapter. Intended for use with Pneumatic Syringes (Air Powered) only!
Shop

8880361 = 5 ML Syringe Adapter

$24.10

The 5cc/ml Adapter Assembly (shown left) consists of a clear tubing with an adapter head on one end (which holds the syringe) to an adapter tab on the other end which fits into the dispenser. The adapter assembly that connects the syringe to the controller delivers the air supply to the piston inside the syringe.


*Note: Replacement O-Rings Available If Needed. EPR o-ring comes standard with adapter. Intended for use with Pneumatic Syringes (Air Powered) only!
Shop

8880359 = 3 ML Syringe Adapter

$22.95

The 3 cc/ml Adapter Assembly (shown left) consists of a clear tubing with an adapter head on one end (which holds the syringe) to an adapter tab on the other end which fits into the dispenser. The adapter assembly that connects the syringe to the controller delivers the air supply to the piston inside the syringe.


*Note: Replacement O-Rings Available If Needed. EPR o-ring comes standard with adapter. Intended for use with Pneumatic Syringes (Air Powered) only!
Shop

8880377 = 30cc/55cc EPR O-Rings - for syringe adapter - 10 pack

$13.50
The EPR o-ring is the standard material of construction for the o-ring as it is supplied on the 8880365 adapter assembly that connects the syringe to the controller and delivers the air supply to the piston inside the syringe. 

Is your material eating the o-ring? Try one of our 8880381 Viton O-ring packs!
Shop

8880381 = 30cc/55cc Viton O-Rings - for syringe adapter - 10 pack

$20.50
Is your material eating the o-ring? Try one of our Viton O-ring packs! These are perfect for materials that can either expand rubber or degrade it to the point where it does not fit the syringe.

The 30cc/55cc Viton o-ring is designed to fit the 8880365 adapter assembly that connects the syringe to the controller and delivers the air supply to the piston inside the syringe.
Shop

8880376 = 10cc EPR O-Rings - for syringe adapter - 10 pack

$11.50
The EPR o-ring is the standard material of construction for the o-ring as it is supplied on the 8880363 adapter assembly that connects the syringe to the controller and delivers the air supply to the piston inside the syringe. 

Is your material eating the o-ring? Try one of our 8880380 Viton O-ring packs!
Shop

8880380 = 10cc Viton O-Rings - for syringe adapter - 10 pack

$18.50
Is your material eating the o-ring? Try one of our Viton O-ring packs! These are perfect for materials that can either expand rubber or degrade it to the point where it does not fit the syringe.

The 10cc Viton o-ring is designed to fit the 8880363 adapter assembly that connects the syringe to the controller and delivers the air supply to the piston inside the syringe.
Shop

8880375 = 5cc EPR O-Rings - for syringe adapter - 10 pack

$10.50
The EPR o-ring is the standard material of construction fro the o-ring as it is supplied on the 8880361 adapter assembly that connects the syringe to the controller and delivers the air supply to the piston inside the syringe. 

Is your material eating the o-ring? Try one of our 8880379 Viton O-ring packs!
Shop

8880379 = 5cc Viton O-Rings - for syringe adapter - 10 pack

$17.50
Is your material eating the o-ring? Try one of our Viton O-ring packs! These are perfect for materials that can either expand rubber or degrade it to the point where it does not fit the syringe.

The 5cc Viton o-ring is designed to fit the 8880361 adapter assembly that connects the syringe to the controller and delivers the air supply to the piston inside the syringe.
Shop

8880374 = 3cc EPR O-Rings - for syringe adapter - 10 pack

$9.50
The EPR o-ring is the standard material of construction fro the o-ring as it is supplied on the 8880359 adapter assembly that connects the syringe to the controller and delivers the air supply to the piston inside the syringe. 

Is your material eating the o-ring? Try one of our 8880378 Viton O-ring packs!
Shop

8880378 = 3cc Viton O-Rings - for syringe adapter - 10 pack

$16.50
Is your material eating the o-ring? Try one of our 8880378 Viton O-ring packs! These are perfect for materials that can either expand rubber or degrade it to the point where it does not fit the syringe.

The 3cc Viton o-ring is designed to fit the 8880359 adapter assembly that connects the syringe to the controller and delivers the air supply to the piston inside the syringe.
Shop

​Product Information:

The Adapter Assembly (shown left) consists of a 2mm ID, 4mm OD clear flexible PE tubing with an adapter head on one end (which holds the syringe) to an adapter tab on the other end which fits into the dispenser. The adapter assembly that connects the syringe to the controller delivers the air supply to the piston inside the syringe. 

These adapters are intended for Pneumatic Syringes only! Manual syringes with a thumb plunger are usually not the same dimensions.

The piston pushes the material forward and, using vacuum, pulls back to control dripping. O-rings in the adapter head keep the syringe snug. Replace when worn. Order the size that corresponds to your syringe size; 30 and 55cc use same adapter.
Adapter Assemblies connect your syringe to the air output of the dispenser. Air is fed into the syringe pushing the piston down the barrel, extruding material. Syringes are held snugly in the adapter head, to prevent air loss. Adapters fit most standard pneumatic dispensers. Intended for twist lock and stab lock use. Replacement O-Rings sold separately. See below.
Part #          Adapter Assembly - Head, Tube, Connector 
                      
8880359      3cc/ml Head Assembly - 5 Ft Hose
8880361      5cc/ml Head Assembly - 5 Ft Hose
8880363      10cc/ml Head Assembly - 5 Ft Hose
8880365      30/55cc/ml Head Assmbly - 5 Ft Hose*
*Note: 30cc/ml and 55cc/ml use the same adapter
Adapter Assembly Tabs

Adapters fit most standard pneumatic dispensers. Each has a tab for twist lock and stab lock use. If you do not need the "twist lock" snip off Adapter Tabs on either side to create a stab lock fitting.
8880365 = 30/55 ML Syringe Adapter
$
29.85    
 
 

The 30/55 cc/ml Syringe Adapter Assembly (shown left) consists of a clear tubing with an adapter head on one end (which holds the syringe) to an adapter tab on the other end which fits into the dispenser. The adapter assembly that connects the syringe to the controller delivers the air supply to the piston inside the syringe. 


*Note: 30cc/ml and 55cc/ml use same adapter. Replacement O-Rings Available If Needed. EPR o-ring comes standard with adapter. Intended for use with Pneumatic Syringes (Air Powered) only!

8880363 = 10 ML Syringe Adapter
$
26.40    
 
 

The 10 cc/ml Adapter Assembly (shown left) consists of a clear tubing with an adapter head on one end (which holds the syringe) to an adapter tab on the other end which fits into the dispenser. The adapter assembly that connects the syringe to the controller delivers the air supply to the piston inside the syringe.


*Note: Replacement O-Rings Available If Needed. EPR o-ring comes standard with adapter. Intended for use with Pneumatic Syringes (Air Powered) only!

8880361 = 5 ML Syringe Adapter
$
24.10    
 
 

The 5cc/ml Adapter Assembly (shown left) consists of a clear tubing with an adapter head on one end (which holds the syringe) to an adapter tab on the other end which fits into the dispenser. The adapter assembly that connects the syringe to the controller delivers the air supply to the piston inside the syringe.


*Note: Replacement O-Rings Available If Needed. EPR o-ring comes standard with adapter. Intended for use with Pneumatic Syringes (Air Powered) only!

8880359 = 3 ML Syringe Adapter
$
22.95    
 
 

The 3 cc/ml Adapter Assembly (shown left) consists of a clear tubing with an adapter head on one end (which holds the syringe) to an adapter tab on the other end which fits into the dispenser. The adapter assembly that connects the syringe to the controller delivers the air supply to the piston inside the syringe.


*Note: Replacement O-Rings Available If Needed. EPR o-ring comes standard with adapter. Intended for use with Pneumatic Syringes (Air Powered) only!

Cartridge Adapter Options:
3232323RPKG = 1/10th Gallon (310 ML) Pneumatic Cartridge Adapter Assembly
$
145.00    
 
 
The IntelliSpense™ 1/10th Gallon (310 ML) Pneumatic Cartridge Adapter Assembly is all metal, intended for rugged applications. Includes the Retainer, cap and air line. Intended for use with the 5100804, 5101284, or 5101284DG dispensers or other dispensers or 1/4 od tube fittings.

Availability: Can range from in stock to 4 week build time. Need multiple units? Contact IDS directly for a quote.
5223100 = 50ML Dual Pneumatic Cartridge Adapter for 1:1 or 2:1 ratio cartridges
$
220.00    
 
 

5223100 = 50ML Dual Pneumatic Cartridge Adapter for 1:1 or 2:1 ratio cartridges includes the adapter intended for handheld use or automation. Intended for use with any standard pneumatic syringe dispenser like the 5101284DG = IntelliSpense™ Dual Gauge Digital Dispenser, and can be used handheld or mounted on any robotic arm.

Intended to allow the user to use timed pulses of air to advance the pistons in both chambers. 100 PSI MAX. 0.85lbs

Availability: Can range from in stock to 4 week build time. Need multiple units? Contact IDS directly for a quote.

5223200 = 50ML Dual Pneumatic Cartridge Adapter for 10:1 ratio cartridges
$
260.00    
 
 

5223200 = 50ML Dual Pneumatic Cartridge Adapter for 10:1 ratio cartridges includes the adapter intended for handheld use or automation. Intended for use with any standard pneumatic syringe dispenser like the 5101284DG = IntelliSpense™ Dual Gauge Digital Dispenser, and can be used handheld or mounted on any robotic arm.

Intended to allow the user to use timed pulses of air to advance the pistons in both chambers. 100 PSI MAX. 0.85lbs

WARNING: Not all cartridges will work with this adapter. It is up to the customer to view the included drawing and determine if their cartridge will work with the adapter.

Availability: Can range from in stock to 4 week build time. Need multiple units? Contact IDS directly for a quote.

Replacement EPR and Viton O-Rings
for Syringe Adapter Assemblies (EPR Standard on Equipment)

Part #               EPR O Rings                            Pkg 10
8880374   3cc   10 Pack EPR - snug-fit in barrel   1 PKG
8880375   5cc   10 Pack EPR - snug-fit in barrel   1 PKG
8880376 10cc   10 Pack EPR - snug-fit in barrel   1 PKG
8880377 30cc   10 Pack EPR - snug-fit in barrel   1 PKG
8880374 = 3cc EPR O-Rings - for syringe adapter - 10 pack
$
9.50    
8880375 = 5cc EPR O-Rings - for syringe adapter - 10 pack
$
10.50    
8880376 = 10cc EPR O-Rings - for syringe adapter - 10 pack
$
11.50    
8880377 = 30cc/55cc EPR O-Rings - for syringe adapter - 10 pack
$
13.50    
Part #               Viton O Rings                           Pkg 10
8880378    3cc  10 Pack Viton - snug-fit in barrel   1 PKG
8880379    5cc  10 Pack Viton - snug-fit in barrel   1 PKG
8880380  10cc  10 Pack Viton - snug-fit in barrel   1 PKG
8880381 30/55 10 Pack Viton - snug-fit in barrel   1 PKG
8880378 = 3cc Viton O-Rings - for syringe adapter - 10 pack
$
16.50    
8880379 = 5cc Viton O-Rings - for syringe adapter - 10 pack
$
17.50    
8880380 = 10cc Viton O-Rings - for syringe adapter - 10 pack
$
18.50    
8880381 = 30cc/55cc Viton O-Rings - for syringe adapter - 10 pack
$
20.50