PMF Epoxy Dispensing And Storage
IDS began building freezers for our customers who store pre-mixed and frozen epoxy back in 2000. For many customers, the expense of meter-mix dispensing systems can be a real challenge. Especially if the total volume used in a day or shift is relatively small. Most Meter-Mix systems are intended for large volume usage, and the gear pumps or piston pumps are cost prohibitive.
IDS offers a wide range of dispensing systems for syringe and cartridge dispensing that works well for pre-mixed and frozen epoxies.
Most Pre-Mixed and Frozen epoxy (PMF Epoxy) is stored at -40c or below.Generally speaking, most PMF epoxies have over a 30 minute work life. Make sure to contact the formulator of the material to see if they can provide you with the material already packaged and frozen. Then ask what temperature to store it. It is very difficult to package and freeze it in house without the proper equipment.
Some customers will still mix in house, and even avoid freezing all together. Of course IDS can also help with those applications.
Air Input: 1/4" Tube or 1/4" Quick Connect Hose Barb (Male Provided With Dispenser)
Availability: From in stock to 4 week build time.
Need multiple units? Contact IDS directly for a quote.
FULL SYSTEM PACKAGE - SHIPPING INCLUDED
The Disposable Path Auger Valve Desktop Station includes the 707000-DISP Disposable Path Auger Valve Contoller, 7060000-DISP Disposable Path Auger Valve, a Valve Stand, and one each of the Disposable Auger Paths in 6, 8 and 16 pitch. Reorder Disposable Auger Paths by pitch size in bags of 10.
Availability: From 4 week build time. Need multiple units? Contact IDS directly for a quote. Note: Know your material! Always confirm compatibility. Viscosity range: 30,000 - 1,300,000 cps
Includes the 5552201N 200MM Economy Robot, pneumatic syringe controller that works with 30cc or 55cc pneumatic syringes, the teach pendant, IO cable, Syringe mount. Requires 1 regulated compressed air line, up to 100psi, each to function. 115V or 230V power supply. Intended for entry level dispensing. If this is a new application, or you have never used a system like this before we suggest contacting IDS directly to discuss your options.
Availability: 2 - 4 week build time. Need multiple units? Contact IDS directly for a quote. If you have never used this system with your material, be sure to speak with an IDS employee before ordering to confirm the compatibility.