Valve System Components
IDS offers a wide range of dispense valves. For semi automated desktop use through fully automated systems, feeding from a syringe or a 10 gallon reservoir or many sizes between, IDS allows you to tailor fit the fluid dispensing system to your production needs. IDS offers both manual and automatic diaphragm dispense valves, among others, for thin Cyanoacrylates, Flux, Oil, Ink, Paint, and Silicone.
Choose from valves or syringes to feed auger vales for dispensing solder paste, filled epoxy, conductive epoxy, resin, or any other fluid. The first step to understanding your needs is to decide on the formulation. Once you have chose the material to dispense we then need an idea of the individual deposit size in volume, as well as what your throughput will dictate for total usage in a day or in a shift. Will it be CCs, ounces, or Gallons? Will your throughput require automation? Contact an IDS customer representative today to discuss your requirements, or fill in our quote page on line.
Choose from valves or syringes to feed auger vales for dispensing solder paste, filled epoxy, conductive epoxy, resin, or any other fluid. The first step to understanding your needs is to decide on the formulation. Once you have chose the material to dispense we then need an idea of the individual deposit size in volume, as well as what your throughput will dictate for total usage in a day or in a shift. Will it be CCs, ounces, or Gallons? Will your throughput require automation? Contact an IDS customer representative today to discuss your requirements, or fill in our quote page on line.
5900011VC = Pneumatic Valve Controller
$
995.00
The 5900011VC Pneumatic Valve Controller is intended for use with most IDS valves. The "A" and "B" outlet ports are used to provide air pressure to the valve, cycling it opened and closed. Along with a valve you will also require a reservoir.
Availability: Can range from 2 - 4 week build time. Need multiple units? Contact IDS directly for a quote. If you have never used this system, be sure to confirm compatibility.
Availability: Can range from 2 - 4 week build time. Need multiple units? Contact IDS directly for a quote. If you have never used this system, be sure to confirm compatibility.
7011010-S = Direct Syringe Mount Reservoir For Valves
$
325.00
RESERVOIR ONLY
The 7011010-S = Direct Syringe Mount Reservoir For Valves Includes: Fluid Adapter, Syringe Air Adapter, 0-60psi Air Regulator & Gauge, Stand for Air Regulator and Weighted base. Does Not Include a Valve or a Valve Stand.
Availability: From 2 - 4 week build time. Need multiple units? Contact IDS directly for a quote. Note: Know your material! Always confirm compatibility.
The 7011010-S = Direct Syringe Mount Reservoir For Valves Includes: Fluid Adapter, Syringe Air Adapter, 0-60psi Air Regulator & Gauge, Stand for Air Regulator and Weighted base. Does Not Include a Valve or a Valve Stand.
Availability: From 2 - 4 week build time. Need multiple units? Contact IDS directly for a quote. Note: Know your material! Always confirm compatibility.
7011010-2L = 2 Liter Reservoir, regulator & gauge,
$
975.00
RESERVOIR ONLY
The 7011010-2L = 2 Liter Reservoir, regulator & gauge, is intended to be used with any IDS Valve and most valves also require a valve controller.
REQUIRES A LINER - DO NOT DIRECT POUR. Most customers will use the bottle that the material comes in, set it directly inside, drop the feed tube in, and then pressurize.
Availability: From 2 - 4 week build time. Need multiple units? Contact IDS directly for a quote. Note: Know your material! Always confirm compatibility.
The 7011010-2L = 2 Liter Reservoir, regulator & gauge, is intended to be used with any IDS Valve and most valves also require a valve controller.
REQUIRES A LINER - DO NOT DIRECT POUR. Most customers will use the bottle that the material comes in, set it directly inside, drop the feed tube in, and then pressurize.
Availability: From 2 - 4 week build time. Need multiple units? Contact IDS directly for a quote. Note: Know your material! Always confirm compatibility.
7011010-5L = 5 Liter Reservoir, regulator & gauge,
$
1,299.00
RESERVOIR ONLY
The 7011010-5L = 5 Liter Reservoir, regulator & gauge, is intended to be used with any IDS Valve and most valves also require a valve controller.
REQUIRES A LINER - DO NOT DIRECT POUR. Most customers will use the bottle that the material comes in, set it directly inside, drop the feed tube in, and then pressurize.
Availability: From 2 - 4 week build time. Need multiple units? Contact IDS directly for a quote. Note: Know your material! Always confirm compatibility.
The 7011010-5L = 5 Liter Reservoir, regulator & gauge, is intended to be used with any IDS Valve and most valves also require a valve controller.
REQUIRES A LINER - DO NOT DIRECT POUR. Most customers will use the bottle that the material comes in, set it directly inside, drop the feed tube in, and then pressurize.
Availability: From 2 - 4 week build time. Need multiple units? Contact IDS directly for a quote. Note: Know your material! Always confirm compatibility.
7020000 = Manual Diaphragm Valve ONLY
$
500.00
VALVE ONLY
The 7020000 - Manual Diaphragm Valve is intended to be used with any pressurized reservoir. NO VALVE CONTROLLER REQUIRED.
Availability: From 2 - 4 week build time. Need multiple units? Contact IDS directly for a quote. Note: Know your material! Always confirm compatibility.
The 7020000 - Manual Diaphragm Valve is intended to be used with any pressurized reservoir. NO VALVE CONTROLLER REQUIRED.
Availability: From 2 - 4 week build time. Need multiple units? Contact IDS directly for a quote. Note: Know your material! Always confirm compatibility.
7040000-3 = Auto Diaphragm Valve ONLY
$
775.00
VALVE ONLY
The 7040000 - Automatic Diaphragm Valve is intended to be used with any pressurized reservoir. Requires a valve controller that can provide air pressure to close.
Availability: From 2 - 4 week build time. Need multiple units? Contact IDS directly for a quote. Note: Know your material! Always confirm compatibility.
The 7040000 - Automatic Diaphragm Valve is intended to be used with any pressurized reservoir. Requires a valve controller that can provide air pressure to close.
Availability: From 2 - 4 week build time. Need multiple units? Contact IDS directly for a quote. Note: Know your material! Always confirm compatibility.
5101292 = Front Closing Valve ONLY
$
795.00
VALVE ONLY
The 5101292 = Front Closing Valve is intended to be used with any pressurized reservoir. Requires a valve controller that can provide air pressure to open and close. These valves are steel and are not suggested for use with CA (Cyanoacrylate) material.
Availability: From 2 - 4 week build time. Need multiple units? Contact IDS directly for a quote. Note: Know your material! Always confirm compatibility.
The 5101292 = Front Closing Valve is intended to be used with any pressurized reservoir. Requires a valve controller that can provide air pressure to open and close. These valves are steel and are not suggested for use with CA (Cyanoacrylate) material.
Availability: From 2 - 4 week build time. Need multiple units? Contact IDS directly for a quote. Note: Know your material! Always confirm compatibility.
7053000 = Mini Metering Positive Displacement Valve (0.010 - 0.100 cc)
$
985.00
VALVE ONLY
The 7053000 = Mini Metering Positive Displacement Valve (0.010 - 0.100 cc) is intended for use with low to medium viscosity materials. You also require a valve controller and reservoir. Contact IDS with questions.
Intended for high accuracy micro dot deposits.
Availability: Can range from 2 - 4 week build time. Need multiple units? Contact IDS directly for a quote. If you have never used this system with your material, be sure to confirm compatibility.
The 7053000 = Mini Metering Positive Displacement Valve (0.010 - 0.100 cc) is intended for use with low to medium viscosity materials. You also require a valve controller and reservoir. Contact IDS with questions.
Intended for high accuracy micro dot deposits.
Availability: Can range from 2 - 4 week build time. Need multiple units? Contact IDS directly for a quote. If you have never used this system with your material, be sure to confirm compatibility.
7052250 = Positive Displacement Dispensing Valve ONLY (0.0001 - 0.012 cc)
$
2,950.00
VALVE ONLY
The 7052250 Positive Displacement Dispensing Valve (0.0001 - 0.012 cc) is intended for use with low to medium viscosity materials. You also require a valve controller and reservoir. These valves are steel and are not suggested for use with CA (Cyanoacrylate) material. Contact IDS with questions.
Intended for high accuracy micro dot deposits. Customer to specify needle gauge size when ordering.
Availability: Can range from 2 - 4 week build time. Need multiple units? Contact IDS directly for a quote. If you have never used this system with your material, be sure to confirm compatibility.
The 7052250 Positive Displacement Dispensing Valve (0.0001 - 0.012 cc) is intended for use with low to medium viscosity materials. You also require a valve controller and reservoir. These valves are steel and are not suggested for use with CA (Cyanoacrylate) material. Contact IDS with questions.
Intended for high accuracy micro dot deposits. Customer to specify needle gauge size when ordering.
Availability: Can range from 2 - 4 week build time. Need multiple units? Contact IDS directly for a quote. If you have never used this system with your material, be sure to confirm compatibility.
Feeling a little confused by all the options? Call IDS for help in getting a better understanding of the products before you order.
