7055000PAK2 = 0.1cc to 1.45 cc Positive Displacement Pistolgrip Valve Station
SKU:
7055000PAK2
$4,290.00
$4,290.00
FULL SYSTEM PACKAGE - SHIPPING COST INCLUDED IN PRICE - anywhere in the Continental USA that can receive UPS Ground shipments.
The 7055000DAK is a desk top or automation system which includes the pneumatic pistol grip controller to be used manually. Trigger cycles the valve to dispense manually adjusted set volume between 0.1cc to 1.45 cc . This Item Will Require A Tool Balance - approximate weight is 6 pounds. Tool balance not provided. The gun does have a mounted ring to attach to your tool balance.
* 7055000 Positive displacement metering valve, (volume per cycle 0.10 – 1.45cc)
* 7080000 Pneumatic trigger handle to mount & activate valve
* Direct Syringe Mount, 30cc Universal syringe air adapter, luer fluid connection, air regulator & gauge assy., etc.
Contact an IDS representative with questiond. Requires 2 regulated compressed air lines, up to 100psi, with tube fittings. 115V or 230V power supply.
Intended for high accuracy small to large dot deposits, even if the material thickens over time or changes in thickness from batch to batch. These valves are steel and are not suggested for use with CA (Cyanoacrylate) material.
Availability: Can range from 4 week build time. Need multiple units? Contact IDS directly for a quote. If you have never used this system with your material, be sure to confirm compatibility.
The 7055000DAK is a desk top or automation system which includes the pneumatic pistol grip controller to be used manually. Trigger cycles the valve to dispense manually adjusted set volume between 0.1cc to 1.45 cc . This Item Will Require A Tool Balance - approximate weight is 6 pounds. Tool balance not provided. The gun does have a mounted ring to attach to your tool balance.
* 7055000 Positive displacement metering valve, (volume per cycle 0.10 – 1.45cc)
* 7080000 Pneumatic trigger handle to mount & activate valve
* Direct Syringe Mount, 30cc Universal syringe air adapter, luer fluid connection, air regulator & gauge assy., etc.
Contact an IDS representative with questiond. Requires 2 regulated compressed air lines, up to 100psi, with tube fittings. 115V or 230V power supply.
Intended for high accuracy small to large dot deposits, even if the material thickens over time or changes in thickness from batch to batch. These valves are steel and are not suggested for use with CA (Cyanoacrylate) material.
Availability: Can range from 4 week build time. Need multiple units? Contact IDS directly for a quote. If you have never used this system with your material, be sure to confirm compatibility.
|
Have everything you need?
You may also require some of these products. Contact an IDS representative if you have any questions! |
